Shell fabric
210 GSM woven cotton twill, garment-washed, tonal dark grey PANTONE 432 C, soft handfeel
Main pant body, cargo pockets, back pockets, waistband
Home › Tech pack templates › Utility Cargo Pant
Free tech pack template · Utility Cargo Pant
Cargo Pant tech pack template, filled in start to finish
26 points of measure graded across 5 sizes, 12 bill-of-materials lines, 12 materials with their swatches, 8 construction callouts, 4 colourways. Generated by Adstronaut AI from one product photo in about six minutes; every value below is the generated draft, shown in full.
- Waistband: Encased elstc w/ drawcord
- Front pocket opening: Slant pkt edge SN TS
- Cargo pocket attachment: Cargo bellows pkt TS
- Cargo pocket flap: Flap close w/ VELCRO
- Back patch pocket: Back pkt + flap TS
- Knee seam: Artic knee seam TS
- Inseam/outseam: 5T OL, SA 1cm
- Leg hem: 2-turn hem SN
Materials
12 materials, each with its swatch, composition and placement
Pocketing fabric
110 GSM polyester-cotton plain weave pocketing, dark grey matched to PANTONE 432 C
Front slash pocket bags and internal pocket facings
Waist elastic
38 mm knitted elastic, soft stretch waistband grade, dark grey
Inside encased waistband
Drawcord
Round cotton drawcord, approx. 6 mm diameter, tonal dark grey PANTONE 431 C with heat-sealed tips
Waist channel
Buttonhole reinforcement fusible
Lightweight fusible woven interfacing, 35-45 GSM, charcoal
Center front drawcord eyelet/buttonhole area, pocket flap support
Sewing thread
Core-spun polyester thread Tex 27/30, tonal dark grey PANTONE 431 C
Main assembly and topstitching throughout
Care label
Printed satin care/content label, black text on white ground
Inside back waistband or side seam
Main brand label
Woven brand tab label, black ground PANTONE Black 6 C with white text PANTONE 11-0601 TCX Bright White
Edge of right back flap pocket
Cargo pocket hook-and-loop
20 mm nylon hook-and-loop tape, dyed dark grey
Under cargo pocket flaps and flap back pockets
Pocket flap reinforcement tape
Narrow woven stay tape, 10 mm, charcoal
Pocket flap fold edges and high-stress pocket openings
Polybag
Clear LDPE packing polybag with size sticker and suffocation warning
Final packaging
Hangtag set
Printed paper hangtag with string fastener, brand and barcode information
Attached at waistband
Colourways
Main body fabric, cargo pockets, waistband and pocket flapsDrawcord and topstitch thread tonal dark greyBrand label backgroundBrand label text
Graded size chart and bill of materials
Every row, as generated
Size chart (cm)
26 points of measure · sizes XS, S, M, L, XL · sample size M
| Point of measure | XS | S | M | L | XL | Tol. |
|---|---|---|---|---|---|---|
| Waist Width (relaxed, edge to edge) | 35 | 37 | 39 | 41 | 43 | +/- 1.0 |
| Waist Width (stretched, edge to edge) | 48 | 50 | 52 | 54 | 56 | +/- 1.0 |
| Front Rise incl. waistband | 30.1 | 30.8 | 31.5 | 32.2 | 32.9 | +/- 0.7 |
| Back Rise incl. waistband | 39.9 | 40.7 | 41.5 | 42.3 | 43.1 | +/- 0.7 |
| Hip Width (20 cm below top waistband) | 52 | 54 | 56 | 58 | 60 | +/- 1.0 |
| Thigh Width (2.5 cm below crotch) | 33 | 34 | 35 | 36 | 37 | +/- 0.7 |
| Knee Width | 27.6 | 28.3 | 29 | 29.7 | 30.4 | +/- 0.7 |
| Leg Opening Width | 25 | 25.5 | 26 | 26.5 | 27 | +/- 0.7 |
| Inseam Length | 75 | 76 | 77 | 78 | 79 | +/- 1.0 |
| Outseam Length incl. waistband | 105 | 106 | 107 | 108 | 109 | +/- 1.0 |
| Crotch Length (front to back through crotch seam) | 70.6 | 71.8 | 73 | 74.2 | 75.4 | +/- 1.0 |
| Fly Length | 15.5 | 16 | 16.5 | 17 | 17.5 | +/- 0.5 |
| Waistband Height | 4.1 | 4.3 | 4.5 | 4.7 | 4.9 | +/- 0.3 |
| Front Pocket Opening Length | 15.7 | 16.1 | 16.5 | 16.9 | 17.3 | +/- 0.5 |
| Front Pocket Bag Depth | 26.6 | 27.3 | 28 | 28.7 | 29.4 | +/- 0.7 |
| Back Patch Pocket Width | 15.5 | 16 | 16.5 | 17 | 17.5 | +/- 0.5 |
| Back Patch Pocket Height | 17.5 | 18 | 18.5 | 19 | 19.5 | +/- 0.5 |
| Back Pocket Flap Height | 5.1 | 5.3 | 5.5 | 5.7 | 5.9 | +/- 0.3 |
| Side Cargo Pocket Width | 17 | 17.5 | 18 | 18.5 | 19 | +/- 0.5 |
| Side Cargo Pocket Height | 20.6 | 21.3 | 22 | 22.7 | 23.4 | +/- 0.5 |
| Side Cargo Pocket Flap Height | 5.6 | 5.8 | 6 | 6.2 | 6.4 | +/- 0.3 |
| Auxiliary Side Pocket Width | 6.9 | 7.2 | 7.5 | 7.8 | 8.1 | +/- 0.3 |
| Auxiliary Side Pocket Height | 11.7 | 12.1 | 12.5 | 12.9 | 13.3 | +/- 0.3 |
| Cargo Pocket Placement from Top Waistband to Pocket Top | 32.4 | 33.2 | 34 | 34.8 | 35.6 | +/- 0.7 |
| Back Pocket Placement from Top Waistband to Pocket Top | 7.9 | 8.2 | 8.5 | 8.8 | 9.1 | +/- 0.5 |
| Bottom Hem Height | 3 | 3 | 3 | 3 | 3 | +/- 0.3 |
Bill of materials
12 lines
| # | Item | Specification | Qty |
|---|---|---|---|
| 1 | Shell fabric | 210 GSM woven cotton twill, garment-washed, tonal dark grey PANTONE 432 C, soft handfeel · Main pant body, cargo pockets, back pockets, waistband | 1.85 m |
| 2 | Pocketing fabric | 110 GSM polyester-cotton plain weave pocketing, dark grey matched to PANTONE 432 C · Front slash pocket bags and internal pocket facings | 0.35 m |
| 3 | Waist elastic | 38 mm knitted elastic, soft stretch waistband grade, dark grey · Inside encased waistband | 0.9 m |
| 4 | Drawcord | Round cotton drawcord, approx. 6 mm diameter, tonal dark grey PANTONE 431 C with heat-sealed tips · Waist channel | 1.4 m |
| 5 | Buttonhole reinforcement fusible | Lightweight fusible woven interfacing, 35-45 GSM, charcoal · Center front drawcord eyelet/buttonhole area, pocket flap support | 0.08 m |
| 6 | Sewing thread | Core-spun polyester thread Tex 27/30, tonal dark grey PANTONE 431 C · Main assembly and topstitching throughout | 260 m |
| 7 | Care label | Printed satin care/content label, black text on white ground · Inside back waistband or side seam | 1 pc |
| 8 | Main brand label | Woven brand tab label, black ground PANTONE Black 6 C with white text PANTONE 11-0601 TCX Bright White · Edge of right back flap pocket | 1 pc |
| 9 | Cargo pocket hook-and-loop | 20 mm nylon hook-and-loop tape, dyed dark grey · Under cargo pocket flaps and flap back pockets | 0.45 m |
| 10 | Pocket flap reinforcement tape | Narrow woven stay tape, 10 mm, charcoal · Pocket flap fold edges and high-stress pocket openings | 0.5 m |
| 11 | Polybag | Clear LDPE packing polybag with size sticker and suffocation warning · Final packaging | 1 pc |
| 12 | Hangtag set | Printed paper hangtag with string fastener, brand and barcode information · Attached at waistband | 1 set |
More pages of the tech pack
The other views, exactly as generated
What the tech pack contains
14 sections in this document
- ✓Flat Sketchincluded
- ✓Sewing Detailsincluded
- ✓Materialsincluded
- ✓Size Tableincluded
- ✓Bill of Materialsincluded
- ✓Product Infoincluded
- ✓Materials Calloutincluded
- ✓Colored Mockupsincluded
- ✓Pantone Colorsincluded
- ✓Detailed Drawingsincluded
- ✓Artworkincluded
- ✓Construction Guideincluded
- ·Fit Lognot in this sample
- ✓PDF exportincluded
- ✓Excel exportincluded
- ·Editable SVG sketchnot in this sample
How to use this template
Filling in a cargo pant tech pack
A cargo pant is the highest operation-count garment in most streetwear lines: every pocket adds cutting, bartacks, and topstitching that show up directly in the quote. The difference between a $9 and a $14 FOB cargo is usually the pocket engineering — so your tech pack must draw and dimension every pocket, flap, and bellows, not just the pant body.
The points of measure that matter
- Front and back rise: utility fits ride lower or fuller than chinos; the rise pair states which.
- Thigh, knee, and leg opening: the taper (or lack of it) is the silhouette — straight, relaxed, or parachute.
- Cargo pocket position from waistband and side seam: anchor each pocket with two datums so it cannot drift between samples.
- Pocket dimensions: bag, flap, and bellows depth: a 3D pocket needs its gusset depth specced or it comes back flat.
- Waistband height and belt-loop length: non-graded constants that read sloppy when they wander.
Questions the factory will ask
- Pocket count and construction per pocket: flap with velcro, snap, or button? Bellows or flat patch?
- Bartack positions — pocket corners, belt loops, fly — and how many per garment.
- Main seam construction: felled, safety-stitched, or lockstitch-and-overlock?
- Hardware spec: snap type and finish, drawcord toggles at the hem, zipper brand for any zip pockets.
- Garment wash: rinse, enzyme, or garment-dyed? Washing changes every measurement — state before/after-wash specs.
Fabric
Cargos typically use cotton ripstop or twill at roughly 220–300 gsm (6.5–9 oz); heavier workwear builds go up to 340 gsm. A touch of mechanical stretch or 2% elastane keeps a slim cargo wearable. Spec the weave (ripstop grid vs 3x1 twill) — it defines the look as much as the color.
Cargo Pant tech pack template FAQ
Why are cargo pants more expensive to produce than chinos?
Operation count. Each cargo pocket adds cutting, hemming, topstitching, bartacks, and often hardware — a six-pocket cargo can carry double the sewing operations of a plain chino, and factories quote by operations.
How do I spec a bellows cargo pocket?
Give the flat pocket width and height, the bellows (gusset) depth, the flap dimensions, the closure type, and the pocket position anchored from the waistband and the side seam. Five numbers plus a callout drawing beats any prose description.
Do washed cargos need two measurement charts?
State whether your POM chart is before or after wash and include the expected shrinkage. For enzyme or garment-dye washes, factories usually cut to a before-wash spec that lands on your after-wash chart.
Try it on your own style
Turn your product reference into a detailed tech pack.
Generate a tech pack, freeGet 25 free credits on signup and generate a watermarked preview for your own product.
Generated by Adstronaut AI from a single product photo. Values are the generated draft for this sample; a real tech pack is reviewed and edited before it goes to a factory.