Brushed canvas upper
Medium-weight brushed cotton canvas, approx. 12 oz, Pantone 11-0608 TCX / #F5F1E8, soft sueded surface
Toe vamp, eyestay facing, heel quarter exterior base
Home › Tech pack templates › Women's Canvas Turf Sneaker
Free tech pack template · Low-top turf sneaker
Sneaker tech pack template, filled in start to finish
30 points of measure graded across 8 sizes, 14 bill-of-materials lines, 14 materials with their swatches, 6 construction callouts, 4 colourways. Generated by Adstronaut AI from one product photo in about six minutes; every value below is the generated draft, shown in full.
- Eyestay / lace row: Stch-thru lace row
- Side logo overlay: SN edge stch logo
- Collar edge: Turned collar top
- Heel counter zone: Counter set + last
- Toe bumper join: Cement foxing bond
- Outsole attachment: Cemented turf sole
Materials
14 materials, each with its swatch, composition and placement
Tonal floral jacquard textile
Embossed or jacquard woven floral textile, Pantone 11-0608 TCX / #F5F1E8, lightweight decorative quarter panel
Medial and lateral quarter underlay panels
Synthetic leather logo overlay
Matte PU synthetic leather overlay, Pantone 19-1617 TCX / #5B2B35, edge turned and topstitched
Lateral and medial side logo appliqué
Satin ribbon shoelace
Flat satin ribbon lace, Pantone 19-1617 TCX / #5B2B35, approx. 18-20mm width
Lacing system
Textile tongue and collar lining
Soft woven or microfiber lining, Pantone 12-0703 TCX / #E9DFC9, smooth comfort finish
Tongue underside and collar interior
Foam padding set
3-5mm polyurethane comfort foam sheets for tongue and collar padding
Inside tongue and collar
Heel counter reinforcement
Thermoplastic heel counter, pre-moldable support sheet, medium stiffness
Internal heel area between upper and lining
Toe puff reinforcement
Thermoplastic toe puff, light-medium stiffness for low-profile toe shape
Internal toe box
Eyelet reinforcement tape
Internal woven stay tape for lace row stability, natural color
Under eyestay seam and lace row
Sockliner
Die-cut cushioned insole board with textile top cover, light beige finish
Inside footbed
Rubber foxing and outsole unit
Molded rubber cup-style sole with textured toe bumper and turf lug bottom, Pantone 19-1617 TCX / #5B2B35, matte finish
Bottom unit including foxing and outsole
Adhesive and bonding cement
Footwear-grade primer and cement system for upper-to-sole attachment
Lasting margin and sole attachment
Brand label / tongue print
Small tonal brand mark print or heat transfer in burgundy at tongue top and heel tab area
Tongue top and heel exterior branding
Retail packaging set
Tissue paper, shoe box, size sticker, stuffing paper
Packing
Colourways
Main upper base, tongue, collar facingTonal floral jacquard side panelsLogo overlay, laces, foxing, outsoleInterior lining visible at collar
Graded size chart and bill of materials
Every row, as generated
Size chart (cm)
30 points of measure · sizes 37, 38, 39, 40, 41, 42, 43, 44 · sample size 40
| Point of measure | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | Tol. |
|---|---|---|---|---|---|---|---|---|---|
| Outsole Length | 24.2 | 25.5 | 26.9 | 28.2 | 29.5 | 30.9 | 32.2 | 33.6 | ±0.3 |
| Bottom/Last Length | 22.7 | 24 | 25.4 | 26.7 | 28 | 29.4 | 30.7 | 32.1 | ±0.3 |
| Forepart Width (widest part of upper) | 8.7 | 9 | 9.3 | 9.6 | 9.9 | 10.3 | 10.6 | 11 | ±0.2 |
| Outsole Width at Ball | 9.5 | 9.8 | 10.1 | 10.4 | 10.7 | 11.1 | 11.4 | 11.8 | ±0.2 |
| Waist Width (midfoot outsole width) | 6.2 | 6.4 | 6.6 | 6.8 | 7 | 7.2 | 7.4 | 7.6 | ±0.2 |
| Heel Width (outsole) | 6.8 | 7 | 7.2 | 7.4 | 7.6 | 7.8 | 8 | 8.2 | ±0.2 |
| Toe Spring Height | 1.5 | 1.6 | 1.7 | 1.8 | 1.9 | 2 | 2.1 | 2.2 | ±0.2 |
| Heel Height (ground to topline at center back) | 6.3 | 6.5 | 6.7 | 6.9 | 7.1 | 7.3 | 7.5 | 7.7 | ±0.3 |
| Quarter Height (sole top to topline at side) | 5.2 | 5.4 | 5.6 | 5.8 | 6 | 6.2 | 6.4 | 6.6 | ±0.3 |
| Vamp Length (toe tip to throat start) | 14 | 14.6 | 15.2 | 15.8 | 16.4 | 17 | 17.6 | 18.2 | ±0.3 |
| Toe Cap/Toe Bumper Height | 2.8 | 2.9 | 3 | 3.1 | 3.2 | 3.3 | 3.4 | 3.5 | ±0.2 |
| Eyestay Length | 10.5 | 10.9 | 11.3 | 11.7 | 12.1 | 12.5 | 13 | 13.5 | ±0.3 |
| Eyestay Width | 2.9 | 3 | 3.1 | 3.2 | 3.3 | 3.4 | 3.5 | 3.6 | ±0.2 |
| Tongue Total Length | 15 | 15.5 | 16 | 16.5 | 17 | 17.5 | 18 | 18.5 | ±0.3 |
| Tongue Width at Center | 5.2 | 5.4 | 5.6 | 5.8 | 6 | 6.2 | 6.4 | 6.6 | ±0.2 |
| Opening Length (inside topline, heel to throat) | 18.3 | 19 | 19.7 | 20.4 | 21.1 | 21.8 | 22.5 | 23.2 | ±0.3 |
| Heel Counter Length | 6.6 | 6.8 | 7 | 7.2 | 7.4 | 7.6 | 7.8 | 8 | ±0.2 |
| Foxing/Midsole Sidewall Height at Waist | 2 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | ±0.2 |
| Foxing/Midsole Sidewall Height at Heel | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | 2.9 | 3 | ±0.2 |
| Foxing/Midsole Sidewall Height at Toe | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 2.7 | 2.8 | ±0.2 |
| Outsole Lug Height | 0.3 | 0.3 | 0.3 | 0.35 | 0.3 | 0.3 | 0.3 | 0.3 | ±0.1 |
| Lace Length | 90 | 90 | 90 | 95 | 105 | 115 | 125 | 135 | ±2.0 |
| Lace Width | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | ±0.1 |
| Logo/Swoosh Length | 9.9 | 10.2 | 10.5 | 10.8 | 11.1 | 11.4 | 11.7 | 12 | ±0.2 |
| Logo/Swoosh Height | 2.8 | 2.9 | 3 | 3.1 | 3.2 | 3.3 | 3.4 | 3.5 | ±0.2 |
| Heel Tab Height | 4.5 | 4.6 | 4.7 | 4.8 | 4.9 | 5 | 5.1 | 5.2 | ±0.2 |
| Heel Tab Width | 5.3 | 5.4 | 5.5 | 5.6 | 5.7 | 5.8 | 5.9 | 6 | ±0.2 |
| Insole Length | 22.2 | 23.5 | 24.9 | 26.2 | 27.5 | 28.9 | 30.2 | 31.6 | ±0.3 |
| Insole Width at Ball | 8.3 | 8.5 | 8.7 | 8.9 | 9.1 | 9.3 | 9.7 | 10 | ±0.2 |
| Sockliner/Footbed Heel Width | 5.3 | 5.5 | 5.6 | 5.8 | 6 | 6.1 | 6.3 | 6.4 | ±0.2 |
Bill of materials
14 lines
| # | Item | Specification | Qty |
|---|---|---|---|
| 1 | Brushed canvas upper | Medium-weight brushed cotton canvas, approx. 12 oz, Pantone 11-0608 TCX / #F5F1E8, soft sueded surface · Toe vamp, eyestay facing, heel quarter exterior base | 0.42 m |
| 2 | Tonal floral jacquard textile | Embossed or jacquard woven floral textile, Pantone 11-0608 TCX / #F5F1E8, lightweight decorative quarter panel · Medial and lateral quarter underlay panels | 0.16 m |
| 3 | Synthetic leather logo overlay | Matte PU synthetic leather overlay, Pantone 19-1617 TCX / #5B2B35, edge turned and topstitched · Lateral and medial side logo appliqué | 2 pcs |
| 4 | Satin ribbon shoelace | Flat satin ribbon lace, Pantone 19-1617 TCX / #5B2B35, approx. 18-20mm width · Lacing system | 2 pcs |
| 5 | Textile tongue and collar lining | Soft woven or microfiber lining, Pantone 12-0703 TCX / #E9DFC9, smooth comfort finish · Tongue underside and collar interior | 0.18 m |
| 6 | Foam padding set | 3-5mm polyurethane comfort foam sheets for tongue and collar padding · Inside tongue and collar | 0.08 m |
| 7 | Heel counter reinforcement | Thermoplastic heel counter, pre-moldable support sheet, medium stiffness · Internal heel area between upper and lining | 2 pcs |
| 8 | Toe puff reinforcement | Thermoplastic toe puff, light-medium stiffness for low-profile toe shape · Internal toe box | 2 pcs |
| 9 | Eyelet reinforcement tape | Internal woven stay tape for lace row stability, natural color · Under eyestay seam and lace row | 0.24 m |
| 10 | Sockliner | Die-cut cushioned insole board with textile top cover, light beige finish · Inside footbed | 2 pcs |
| 11 | Rubber foxing and outsole unit | Molded rubber cup-style sole with textured toe bumper and turf lug bottom, Pantone 19-1617 TCX / #5B2B35, matte finish · Bottom unit including foxing and outsole | 2 pcs |
| 12 | Adhesive and bonding cement | Footwear-grade primer and cement system for upper-to-sole attachment · Lasting margin and sole attachment | 0.05 kg |
| 13 | Brand label / tongue print | Small tonal brand mark print or heat transfer in burgundy at tongue top and heel tab area · Tongue top and heel exterior branding | 2 sets |
| 14 | Retail packaging set | Tissue paper, shoe box, size sticker, stuffing paper · Packing | 1 set |
More pages of the tech pack
The other views, exactly as generated
What the tech pack contains
14 sections in this document
- ✓Flat Sketchincluded
- ✓Sewing Detailsincluded
- ✓Materialsincluded
- ✓Size Tableincluded
- ✓Bill of Materialsincluded
- ✓Product Infoincluded
- ✓Materials Calloutincluded
- ✓Colored Mockupsincluded
- ✓Pantone Colorsincluded
- ✓Detailed Drawingsincluded
- ✓Artworkincluded
- ✓Construction Guideincluded
- ·Fit Lognot in this sample
- ✓PDF exportincluded
- ✓Excel exportincluded
- ·Editable SVG sketchnot in this sample
How to use this template
Filling in a sneaker tech pack
Footwear tech packs speak a different language from apparel: lasts, uppers, sockliners, and outsole tooling replace blocks and seams. The last (the 3D form the shoe is built on) and the outsole mold are the two big commitments — tooling an original outsole costs real money, so most first sneakers use an open (existing) mold, and the tech pack must say which path you are on.
The points of measure that matter
- Last reference and toe shape: the last defines fit and silhouette; reference the factory's last number or supply your own.
- Upper pattern pieces with materials per piece: a sneaker upper is a map — every panel gets a material, thickness, and finish.
- Heel height and toe spring: the outsole geometry numbers that decide the stance.
- Collar and tongue foam heights: padding specs that separate a premium feel from a hollow one.
- Stitch rows and margins: double or triple rows at stress panels, with stitch margin from the edge.
Questions the factory will ask
- Open outsole mold or custom tooling? Custom molds carry a tooling charge and minimums per size.
- Size run and last standard: US, EU, or UK run, and whether a women's-specific last is used or a graded unisex last.
- Upper materials: canvas weight (typically 10–14 oz for vulcanized styles), suede split vs full grain for overlays.
- Construction: vulcanized (foxing tape, curing oven) or cold cement? They produce different looks and factories usually do one or the other.
- Sockliner spec: material, thickness, branding print, and whether it is removable.
Fabric
A canvas court sneaker typically uses 10–14 oz cotton canvas uppers with suede or leather overlays, a rubber cupsole or vulcanized outsole, and an EVA or PU sockliner. Every component — foxing tape, laces (length by eyelet count), eyelets, webbing heel pull — is a BOM row with its own supplier and finish.
Sneaker tech pack template FAQ
How is a footwear tech pack different from an apparel one?
It is organized around the last and the outsole instead of a pattern block: last reference, upper pattern map with a material per panel, outsole construction (vulcanized or cold cement), sockliner, and hardware. Sizing is a run (US/EU/UK) rather than a graded POM chart.
Do I need a custom outsole mold for a first sneaker?
Usually not — most first productions use an open mold the factory already owns, which avoids tooling costs and minimums. The tech pack should state the chosen path, because it changes both the quote and the timeline.
What canvas weight do sneaker uppers use?
Typically 10–14 oz cotton canvas for court and vulcanized styles, with heavier duck canvas on skate-oriented builds. Spec the weight, weave, and any coating alongside each overlay material, panel by panel.
Try it on your own style
Turn your product reference into a detailed tech pack.
Generate a tech pack, freeGet 25 free credits on signup and generate a watermarked preview for your own product.
Generated by Adstronaut AI from a single product photo. Values are the generated draft for this sample; a real tech pack is reviewed and edited before it goes to a factory.